Laser Induced Fluorescence Measurements and Modeling of Nitric Oxide in High-Pressure Premixed Flames
Author | : National Aeronautics and Space Administration (NASA) |
Publisher | : Createspace Independent Publishing Platform |
Total Pages | : 244 |
Release | : 2018-07-25 |
ISBN-10 | : 1724277790 |
ISBN-13 | : 9781724277794 |
Rating | : 4/5 (90 Downloads) |
Book excerpt: Laser-induced fluorescence (LIF) has been applied to the quantitative measurement of nitric oxide (NO) in premixed, laminar, high-pressure flames. Their chemistry was also studied using three current kinetics schemes to determine the predictive capabilities of each mechanism with respect to NO concentrations. The flames studied were low-temperature (1600 less than T less than 1850K) C2H6/O2/N2 and C2H6/O2/N2 flames, and high temperature (2100 less than T less than 2300K) C2H6/O2/N2 flames. Laser-saturated fluorescence (LSF) was initially used to measure the NO concentrations. However, while the excitation transition was well saturated at atmospheric pressure, the fluorescence behavior was basically linear with respect to laser power at pressures above 6 atm. Measurements and calculations demonstrated that the fluorescence quenching rate variation is negligible for LIF measurements of NO at a given pressure. Therefore, linear LIF was used to perform quantitative measurements of NO concentration in these high-pressure flames. The transportability of a calibration factor from one set of flame conditions to another also was investigated by considering changes in the absorption and quenching environment for different flame conditions. The feasibility of performing LIF measurements of (NO) in turbulent flames was studied; the single-shot detection limit was determined to be 2 ppm. Reisel, John R. and Laurendeau, Normand M. Unspecified Center NASA-CR-195404, E-9248, NAS 1.26:195404 NAG3-1038; RTOP 537-02-20...